Klipsch Reference Premiere RP-8060FA II Dolby Atmos Floorstanding Speaker (Single)

Features

• BUILT-IN ELEVATION SPEAKER
  The RP-8060FA II full-range tower speakers features a high-performance 6.5” 2-way up-firing Dolby Atmos speaker integrated in the top for an awe-inspiring, encompassing experience. It’s a perfectly matched set up that virtually disappears. The integrated speaker terminals are placed low on the cabinet for convenience and an unobtrusive connection.
• TAKE YOUR MOVIES AND MUSIC TO NEW HEIGHTS
  Our proprietary speaker technologies are ideal for delivering the most immersive, impactful 360° Dolby Atmos® listening experience. Controlled directivity and high performance ensure focus and precise aiming of high frequency energy.
• 90° X 90° SILICON COMPOSITE HYBRID TRACTRIX HORN
  Horn loading maximizes efficiently and increases detail while focusing high frequencies towards the listening area. Proprietary Tractrix® geometry provides the most efficient transfer of high frequency waves into the listening area. The phase plug and compressed molded silicon face ensure smooth frequency response. When combined, the cleanest, most natural sound possible is created. The second generation increases horn size for a larger soundstage and enhanced directivity.
• LINEAR TRAVEL SUSPENSION (LTS) TITANIUM DIAPHRAGM TWEETER
  The exclusive Linear Travel Suspension minimizes distortion for enhanced, detailed performance. LTS tweeters are a hallmark of previous Reference lines, making it a core component of some of the best speakers in the world
• VENTED TWEETER DESIGN
  The vented tweeter housing reduces standing waves that create unwanted harmonics, resulting in enhanced detail and clarity in high frequency reproduction.
• CERAMETALLIC WOOFERS – ALL NEW DESIGN
  A signature feature on the Reference Premiere series, Cerametallic™ woofers are exceptionally rigid and lightweight for minimal distortion and maximum efficiency. New aluminum shorting rings reduce distortion as well as increased power handling and the new motor structure improve transit response with more control with greater speed and accuracy.
• TRACTRIX PORTS
  Utilizing Tractrix geometry, the Reference Premiere ports allow for the most efficient, fastest air transfer from the cabinet, which reduces port noise for punchier low frequencies. Klipsch Tractrix ports have custom designed inner flares that help reduce air turbulence entering the port. Less turbulent air helps reduce port noise for cleaner, more powerful bass.
• BI-WIRING / BI-AMPING CAPABILITY
  Dual input terminals for bi-wiring / bi-amping capabilities. Bi-wiring separates high and low frequency current into separate speaker cables, reducing intermodulation distortion, for clearer midrange. Bi-amping allows for customization using outboard crossovers when using separate amplifiers.
• ADVANCED CABINET DESIGN
  Additional bracing and a divided cabinet have been added to minimize cabinet resonances and vibration, for the utmost transparency and clarity. Featuring audiophile-grade wire and easily accessible aluminum binding posts for any connection type. The RP-8060FA II finishes include ebony vinyl and walnut vinyl that boast satin painted baffles with a scratch resistant finish. The RP-8060FA II cast aluminum feet provide a more modern look with less resonance than MDF or ABS plastic. These aluminum feet are mechanically designed to minimize surface area in contact with floor, decoupling the speaker for faster, tighter low frequencies and more detail.

Specification

• Main Channel Specification
  Frequency response: 35-25kHz +/- 3dB
  Sensitivity*: 98dB @ 2.83V / 1m* SPL at 1m, half-space anechoic with 2.83V input, in-room sensitivity
  Power handling (cont/peak): 150W / 600W
  Nominal impedance: 8 ohms compatible
  Crossover frequency: 1630Hz
  High frequency driver: 1" titanium LTS vented tweeter with hybrid cross-section expanded Tractrix® horn
  Low frequency driver: Dual 8” Cerametallic cone woofers with Faraday rings
  Enclosure material: MDF (internally braced)
  Enclosure type: Bass reflex via dual chamber rear-firing Tractrix® ports
  Inputs: Dual aluminum binding posts / bi-wire / bi-amp
  Height inches (mm): 43.11" (109.5 cm)
  Width inches (mm): 10.84" (27.5 cm)
  Depth inches (mm): 20.80" (52.8 cm)
  Product weight lbs (kg): 75.7 lb (34.35 kg)
  Finish: Ebony, Walnut
  
• Height Channel Specification
  Frequency Response: Conforms to Dolby Atmos Specifications
  Sensitivity: Conforms to Dolby Atmos Specifications
  Power Handling: 100W / 400W
  Nominal Impedance: 8 ohms Compatible
  Crossover Frequency: 2kHz
  High Frequency Driver: 1" Titanium LTS Tweeter with Hybrid Tractrix Horn
  Low Frequency Driver: 6.5" Cerametallic Cone Woofer
  Enclosure Material: MDF
  Enclosure Type: Acoustic Suspension
  Inputs: Single aluminum binding posts