Pioneer GM-A3702 2-Channel Amplifier with Zagg Cleaner
Regular Price CA$140.00 Special Price CA$119.99
Condition:
New
Elevate your car audio with the Pioneer GM-A3702, a 2-channel amplifier that delivers such impressive boost to your car's audio , you’ll find yourself excited to drive. Standard factory car stereos usually have 10 watts RMS maximum output power per channel. This punchy Pioneer amplifier will power a pair of speakers with 60 watts RMS each—a gigantic step above the power supplied by your car radio alone. You can also put the Pioneer GM-A3702 amplifier into single-channel mode, switch on the low-pass filter for greater sound clarity, and run a subwoofer with up to 190 watts RMS. Speaker-level inputs allow you to add the GM-A3702 to a factory radio that doesn't have preamp outputs.
This item is available for local pickup. (Details)Authorized dealer. Sold with full warranty.



Fast Shipping


Secure Checkout


30-Day Returns
Features:
- 500 Watts Max Power
- Automatic signal sensing and Turn-ON
- Hi-Volt input level control
- Balanced isolator input circuit
- 60 watts RMS x 2 at 4 ohms (95 watts RMS x 2 at 2 ohms)
- 190 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
- CEA-2006 compliant
- Class AB amp technology
- Selectable low-pass filter (80 Hz, 12 dB per octave)
- 10-gauge power and ground leads recommended — wiring and hardware not included with amplifier
Specifications:
- CEA-2006 Compliant: Yes
- Performance
Allowable Load Impedance: 2 ohm to 8 ohm allowable
Avg Current Consumption (amps x #ch): 4 Ohm - 6.5A (1Ch) / 4 Ohm - 4A (2Ch)
Crossover Network Channel: LPF - A Ch 80Hz
Crossover Network Channel Slope: -12db/oct (A Ch)
Frequency Response Channel: 10Hz to 70kHz (+0dB,-3dB) A Ch
Fuse Rating: 25 A
Input Level @Gain Max: 0.3 V to 6.5 V - RCA / 3.0 V to 26 V - Speaker
Nominal Power Output: 2 Ohm - 95W x 2 / 4 Ohm - 50W x 2 / 4 Ohm Bridged - 190W x 1
RCA Input: 2-Channel
Signal to Noise: 78 dBA (Reference: 1 W into 4 ohm) - Amplifier Features
Bridgable: Yes
Class: A/B
Grounding System: Negative
Power Source: 14.4V (10.8 V to 15.1 V allowable)
Protection Control system: Yes
Terminal Type: Screw
Unit Weight: 3.1 lbs
| Package Contents |
|
|---|
Write Your Own Review





